Cotton/Linen

Cotton and Linen materials have several advantages such as: will not cold flow, good mechanical properties, easy to machine, and good heat resistance. They tend to have low chemical resistance to acids and low tensile strength. Applications are numerous, such as bearings, gears, electrical, shims and spacers, and wear guides.

 

To learn more about different Norplex-Micarta cotton and linen materials, please continue your selection below.

Resin

Epoxy

Epoxy resin are very diverse and are often used where electrical insulation and a tough resin system are required.

Phenolic

Phenolic resins are very versatile in their applications and are typically lower cost when compared to epoxy based systems.

Melamine

Melamine resin is very hard and has excellent track resistance.

Form

Tube

Norplex-Micarta tubes are available with Inner Diameters ranging between 0.093” -  48” and wall thicknesses ranging from 0.031” – 5.000”.

Pre-preg

Pre-preg is a smei-cured product avaible up to 48" wide and in various roll lengths as well as cut into sheets.

Rod

Norplex-Micarta rods are available in diameters from .187” – 5.00”

Sheet

Flat sheet stock in thickness from 0.010 inches to over 8 inches and maximum width of 48 inches, maximum length of 120 inches.