Sheets in thicknesses from 0.010” – 8”+ and widths and lengths to 48” x 120” sizes

Norplex-Micarta can manufacture nearly any thickness. Therefore, there is no reason to buy .500” and sand to .437”


Sheet sizes include (in inch):

48” x 120”  48” x 108”  48” x 96”

48” x 84”  48” x 72”  48” x 60”

48” x 48”  48” x 42”  48” x 39”

48” x 36”  39” x 79”  39” x 72”

39” x 60”  39” x 39”  36” x 72”


Sheet sizes include (in meter):

1.2192 x 3.048    1.2192 x 2.7432   1.2192 x 2.4384

1.2192 x 2.1336  1.2192 x 1.8288   1.2192 x 1.524

1.2192 x 1.2192  1.2192 x 1.0668   1.2192 x 0.9906

1.2192 x 0.9144  0.9906 x 2.0066   0.9906 x 1.8288

0.9906 x 1.524    0.9906 x 0.9906   0.9144 x 1.8288 


Please note: not all materials are available in all sizes because of substrate availability and minimum run quantities. All tolerances will comply with NEMA industry standard unless otherwise specified.


To learn more about different Norplex-Micarta sheet products, please continue your selection below.



Epoxy resin are very diverse and are often used where electrical insulation and a tough resin system are required.


Phenolic resins are very versatile in their applications and are typically lower cost when compared to epoxy based systems.


Melamine resin is very hard and has excellent track resistance.


Silicone resins have the distinction of being very resistant to heat.


Polyester resins are a good general choice for many lower temperature electrical applications.

Other Resins

Specality resins and co-polymer combinations.



Fiberglass comes in many forms. From woven to continuous filament mat, galss based substrates are used in electrical and high temperature applications.


Cotton or Linen can be an excellent choice of substrate in both electrical and mechanical applications.


Paper based grades are often used in electrical applications where the material can be punched due to its relatively thin requirements. Paper based materials can include covers of various color to provide a distinct appearance.

Exotic Substrates

Norplex-Micarta can incorporate many different substrates to tailor the composite products to the specific applicaiton. Carbon fiber, Kevlar and nylon are just some of the potential substrates as well as combinations of substrates.